Metal Finishing Equipment

DE Series Relay/Control
30 amp, Single Set-Point, Precise Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Vapor tight, IP21, front panel protection. ±.25% full span, single digit accuracy. 30 amps switching capabilities. 120-240 volts. Adjustable temperature range from -40°F (-40°C) to 1000°F (538°C).

DE Series Combination Control
20 – 125 amps, Single Set-Point, Precise Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Single or three phase. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 1/8 DIN plastic enclosure with sealed tactile switches and stainless steel hardware. Large switching capacity from 20-125 amps up to 600 volts. Adjustable temperature range from -40°F (-40°C) to 1000°F (538°C).

DLC Series Thermostat
Single Set-Point, User Friendly Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. Single pole, double throw switch rated at 16-amps for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).

DLC Series Relay/Control
Single Set-Point, 30 amps

Provides precise control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. Vapor tight, IP21, front panel protection, plastic enclosure with sealed tactile switches. 30 amp switching capacity for either 120 or 240 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).

DLC Series Combination Control
Single Set-Point, User Friendly Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm thermistor sensor included standard with the control. NEMA 1, IP21, flame retardant and gasketed plastic enclosure with stainless steel hardware. Large switching capacity from 20-150 amps for up to 600 volts. Single phase. Adjustable temperature range from -58°F (-50°C) to 302°F (150°C).

DQ Series Thermostat
Up to 15 amps, Dual Set-Point, Precise Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Two set points (heating and cooling). Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 1/4 DIN plastic enclosure with stainless steel hardware. Up to 15 amps. 600 volts. Single or three phase. Adjustable temperature range from -40°F (-40°C) to 1000°F (538°C)

DQ Series Relay/Control
30 amps, Dual Set-Point, Precise Control

Provides precise control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Two set points (heating and cooling). Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 1/4 DIN plastic enclosure with sealed tactile switches and stainless steel hardware. Up to 30 amps. 600 volts. Single or three phase. Adjustable temperature range from -40°F (-40°C) to 1000°F (538°C)

DQ Series Combination Control
20 – 125 amps, Dual Set-Point, Precise Control

Provides precise digital control for consistent plating and etch rates in most aqueous processes. Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 1/8 DIN plastic enclosure with sealed tactile switches and stainless steel hardware. Large switching capacities from 20-125 amps up to 600 volts. Single or three phase. Adjustable temperature range from -40°F (-40°C) to 1000°F (538°C)